1. product introduction:

The function of the finished product breaking machine is to separate the aerated blocks or plate products that adhere to each other after curing in the process of manufacturing aerated concrete blocks for transportation and use. In the process, the embryo body is turned over 90 degrees, and the longitudinal cutting is completed in the form of horizontal cutting, and the embryo body is no longer turned back after cutting. Therefore, during autoclaving curing, the embryo body is still stacked piece by piece, and adhesion is easy to be caused when sand is used as the main raw material. At this time, a finished product breaking machine is required.

2. finished break board machine:

1. The finished breaking machine is simple and practical in structure, easy to install and maintain;
2. After the blank is turned over, the width of the blank is 600mm and the height is 1200mm, so the cutting steel wire is shorter, so it is not easy to break, not easy to drift, and the cutting accuracy is high;
3. The longitudinal cutting device is fixed, and the blank body walks on the cutting trolley to complete the longitudinal cutting. The horizontal cross-cutting device adopts chain drive to keep the cross-cutting frame lifting drive consistent and ensure cutting accuracy;
4. After the blank is upright, both sides (600mm wide) can be cut in the longitudinal direction of the blank, and the milling groove can be completed at the same time, and there is no need to configure the notch processing equipment;
5. In addition to the production of blocks, the finished breaking machine also produces plates, and cuts the blank on six sides, so the quality of the products is not affected by the coating of mold oil and the deformation of the mold;
6. The operation of the equipment is simple and convenient. The cutting process (turning, slitting and crosscutting) of this machine is completed separately without working stations, so the work of each working station is simplified and the operation and maintenance are convenient.